Filter
Top Products
Using the Configuration Interface
44 D-Link Systems, Inc.
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access
to Mon-Fri from 3pm to 8pm. You could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and
enter a Start Time of 3pm and End Time of 8pm.
Add/Edit Schedule Rule
Name the schedule, such as Weekday rule.
Place a checkmark in the boxes for the desired days or select the All Week
radio button to select all seven days of the week.
Select this option if you want this schedule in effect all day for the selected
day(s).
If you don’t use the All Day option, then you enter in the time here. The start
time is entered in two fields. The first box is for the hour and the second box
is for the minute. Email events are triggered only by the start time.
The end time is entered in the same format as the start time. The hour in the
first box and the minutes in the second box. The end time is used for most
other rules, but is not used for email events.
Saves the new or modified Schedule in the Schedule Rules List. When you
are done editing the settings, you must click the Save Settings button at the
top of the page to make the changes effective and permanent.
Schedule Rules List
This list displays all of the currently defined schedules. Entries can be modified by clicking on the
paper and pencil icon. To delete an entry, click on the trash can icon. After you’ve completed all
modifications or deletions, you must click the Save Settings button at the top of the page to save your
changes. The router must reboot before new settings will take effect. You will be prompted to Reboot
the Device or Continue. If you need to make additional settings changes, click Continue. If you are
finished with your configuration settings, click the Reboot the Device button.
Schedule Name:
Day(s):
All Day:
Start Time:
End Time:
Save:
Tools > Schedules