Filter
Top Products
5 Configuration D-Link Web Smart Switch User Manual
VLAN page.
The member port you configured in 802.1Q VLAN setting page will be the static member port of
Auto Surveillance VLAN.
Priority: The 802.1p priority levels of the traffic in the Auto Surveillance VLAN. The possible values are
Highest, High, Medium and Low.
ent changes of Auto Surveillance VLAN global settings.
LAN will automatically detect D-Link Surveillance Devices by default.
ance components that could be configured to be auto-detected by the Auto
nce component. The maximum
e an ACL profile (Profile ID: 56) for all the
rveillance component and Refresh to refresh the Auto Surveillance VLAN
ummary table.
Jumbo Frame
Tagged Uplink/Downlink Port: Specifies the ports to be tagged uplink port or downlink port for the Auto
Surveillance VLAN.
Click Apply to implem
User-defined MAC Settings:
Component Type: Auto Surveillance V
There are another five surveill
Surveillance VLAN. These five components are Video Management Server (VMS), VMS Client/Remote
viewer, Video Encoder, Network Storage and Other IP Surveillance Devices.
Description: Here to input the description for the component type.
MAC/OUI: You can manually create an MAC or OUI address for the surveilla
number of user defined MAC address is 5. System will auto generat
Auto Surveillance VLAN rules.
Click Add to create a new su
s
L2 Functions >
s support jumbo frames (frames larger than the Ethernet frame size of
s (tagged). Default is disabled, Select Enabled then click Apply to turn on
D-Link Gigabit Web Smart Switche
1536 bytes) of up to 10,000 byte
the jumbo frame support.
Figure 5.34 – L2 Functions > Jumbo Frame
tions > Port MirroringL2 Func
nitoring network traffic that forwards a copy of each incoming and/or
the Switch to another port, where the packet can be studied. This enables
Port Mirroring is a method of mo
outgoing packet from one port of
network managers to better monitor network performances.
Figure 5.35 – L2 Functions > Port Mirroring
ptions for the Source Port
from the source port and forwards it to the Target Port.
Selection o
T
s are as follows:
X (transmit) mode: Duplicates the data transmitted
Click “all” to include all ports into port mirroring.
3
3
5
5