Filter
Top Products
6 Command Line Interface D-Link Web Smart Switch User Manual
Each command is listed in detail, as
follows:
?
Purpose To display a list of commands.
Syntax
?
Description The ? command displays a list of commands of the switch.
Parameters None.
Restrictions None.
Example usage:
To display a list of commands of the switch:
DGS-1210-52> ?
USEREXEC commands :
config account admin password <passwd>
config ipif System { ipaddress <ip-address> <subnet-mask> gateway <gw-
address> | dhcp }
debug info
download { firmware_fromTFTP tftp://ip-address/filename | cfg_fromTFTP
tftp://ip-address/filename }
logout
ping <ip_addr>
reboot
reset config
save
show ipif
show switch
upload { firmware_toTFTP tftp://ip-address/filename | cfg_toTFTP tftp://ip-
address/filename }
DGS-1210-52>
download
Purpose To download and install a firmware, boot, or switch configuration
file from a TFTP server.
Syntax
download { firmware_fromTFTP tftp://ip-address/filename |
cfg_fromTFTP tftp://ip-address/filename}
Description The download command downloads a firmware, boot, or switch
configuration file from a TFTP server.
Parameters firmware_fromTFTP − Download and install new firmware on the
Switch from a TFTP server.
cfg_fromTFTP − Download a switch configuration file from a
TFTP server.
tftp://ip-address/ − The IP address of the TFTP server.
filename − The filename of the firmware or switch configuration
file on the TFTP server. You need to specify the DOS path if the
7
7
7
7