Filter
Top Products
6 Command Line Interface D-Link Web Smart Switch User Manual
Example usa
ge:
To restart the Switch:
DGS-1210-52> reboot
% Device will reboot, please wait a few minutes to re-login.
DGS-1210-52>
reset config
Purpose To reset the Switch to the factory default settings.
Syntax
reset config
Description All configurations will be reset to the default settings.
Parameters None.
Restrictions None.
Example usage:
To restore all of the Switch’s parameters to their default values:
DGS-1210-52> reset config
% Device will reboot after reset configuration successfully.
DGS-1210-52>
show ipif
Purpose To display the configuration of an IP interface on the Switch.
Syntax
show ipif
Description The show ipif command displays the current IP address of the
switch.
Parameters None.
Restrictions None.
Example usage:
To display IP interface settings:
DGS-1210-52> show ipif
IP Setting Mode : Static
IP Address : 172.17.5.214
Subnet Mask : 255.255.255.0
Default Gateway : 172.17.5.254
DGS-1210-52>
8
8
1
1