Filter
Top Products
17
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
The default MAC address is set to the WAN’s physical interface
MAC address on the Broadband Router. You can use the “Clone
MAC Address” button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN MAC address
with the MAC address of the router. It is not recommended that
you change the default MAC address unless required by your
ISP.
Enter a DNS Address if you do not wish to use the one provided
by your ISP.
Enter an MTU value only if required by your ISP. Otherwise,
leave it a the default setting.
Clone MAC
Address:
Primary/Secondary
DNS Address:
MTU:
Static IP Address
Home > WAN > Static IP Address