Filter
Top Products
28
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)
computers by their MAC addresses from accessing the Network. You can either manually
add a MAC address or select the MAC address from the list of clients that are currently
connected to the Broadband Router.
Select the filter you wish to use; in this case, MAC filters was
chosen.
Choose Disable MAC filters; allow MAC addresses listed
below; or deny MAC addresses listed below.
Enter the name here.
Enter the MAC Address.
Select a DHCP client from the pull-down list; click Clone to
copy that MAC Address.
Advanced > Filters > MAC Filters
Filters:
MAC Filters:
Name:
MAC Address:
DHCP Client: