Filter
Top Products
84
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
You will need to change the port information within the Warcraft 3 software for computers
#2 and up.
Configure the Game Port information on each computer:
Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you
should see Game Port. Enter the port number as you entered in the above steps.
16 How do I use NetMeeting with my D-Link Router?
Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of STATIC
PORTS. That means that each NetMeeting connection is somewhat different than the
last. For instance, the HTTP web site application uses port 80. NetMeeting can use any
of over 60,000 different ports.
All broadband routers using (only) standard NAT and all internet sharing programs like
Microsoft ICS that use (only) standard NAT will NOT work with NetMeeting or other
h.323 software packages.
The solution is to put the router in DMZ.
Note: A few hardware manufacturers have taken it on themselves to actually provide
H.323 compatibility. This is not an easy task since the router must search each incoming
packet for signs that it might be a netmeeting packet. This is a whole lot more work than
a router normally does and may actually be a weak point in the firewall. D-Link is not
one of the manufacturers.
To read more on this visit http://www.HomenetHelp.com.
17 How do I set up my router to use iChat? -for
Macintosh users-
You must open ports on your router to allow incoming traffic while using iChat.
iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403
(UDP) To video conference with other clients.
Step 1: Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Step 2: Click on Advanced and then click Firewall.
Step 3: Create a new firewall rule:
Click Enabled.
Enter a name (ichat1).
Click Allow.