Filter
Top Products
67
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3: Power cycle the cable modem and router.
Turn the cable modem off (first) . Turn the router off Leave them off for 2 minutes.** Turn
the cable modem on (first). Wait until you get a solid cable light on the cable modem.
Turn the router on. Wait 30 seconds.
** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.
Step 4: Follow step 1 again and log back into the web configuration. Click the Status
tab and click the Device Info button. If you do not already have a public IP Address
under the WAN heading, click on the DHCP Renew and Continue buttons.
Static Cable Connection
Step 1: Log into the web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and
the password is blank (nothing).
Step 2: Click the Home tab and click the WAN button. Select Static IP Address and
enter your static settings obtained from the ISP in the fields provided.
If you do not know your settings, you must contact your ISP.