Filter
Top Products
24
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Select Enabled or Disabled.
Enter the name referencing the virtual service.
The server computer in the LAN (Local Area Network) that will
be providing the virtual services.
The protocol used for the virtual service.
The port number of the service used by the Private IP computer.
The port number on the WAN (Wide Area Network) side that
will be used to access the virtual service.
The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. If it is set to Time, select
the time frame for the service to be enabled. If the system time
is outside of the scheduled time, the service will be disabled.
If you have a Web server that you wanted Internet users to
access at all times, you would need to enable it. Web (HTTP)
server is on LAN (Local Area Network) computer 192.168.0.25.
HTTP uses port 80, TCP.
Name: Web Server
Private IP: 192.168.0.25
Protocol Type: TCP
Private Port: 80
Public Port: 80
Schedule: always
Click on this icon to edit the virtual service.
Click on this icon to delete the virtual service.
Virtual Server:
Name:
Private IP:
Protocol Type:
Private Port:
Public Port:
Schedule:
Example #1: