Filter
Top Products
123
DCS-6620 User’s Manual
D-Link Systems, Inc.
Schedule Video Recording with Motion Detection
Schedule Video Recording with Motion
Detection
Next, run the IP surveillance program. Click on the Configurations button and select Scheduler.
Check “Enable motion detection.”
Click on “New” to have a new window to monitor video.
Enter in a window name.
Adjust the “Sensitivity” and “Percentage” levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.
After adding the motion window, click on save to enable the activity display. You can
add up to 3 motion windows to trigger recording.
To schedule video recording with motion detection, you must first enable motion detection on
the PTZ Internet Camera. Click the Motion Detection button under the Advanced tab from the
Configuration screen to access settings that affect how the DCS-6620 PTZ Internet Camera can
serve as a security device by recording only when motion is detected. Note: These settings
can be configured in your Web browser and while logged into the IP surveillance Program.
Click Motion Detection
In this window, follow the steps below to ensure that motion detection is correctly enabled:
For detailed information about each setting, please refer to Configuration > Advanced > Motion
Detection in the section titled “Using the DCS-6620 With an Internet Browser” (page 52).