Filter
Top Products
16
DCS-6620 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
Network
Settings:
Here users can configure the Network
Settings for the camera. Enter the IP
address, Subnet mask, Default router
IP, Primary DNS, and Secondary
DNS. Automatically, the option to
reset IP address at boot is selected.
If you would like to save your IP
address settings, make sure to
uncheck this box. These settings can
also be configured on the Advanced
> Network screen (page 39) when
configuring the camera via a Web
Browser.
Click Next and then Apply to save the configured
settings. Users can click Previous to modify
changes or mistakes.
Setup
On the initial Setup Screen you can configure
System and Date/Time settings for each camera.
Click Next to configure Network settings for the
camera.
System
Settings:
Enter a Camera Name and create an
Admin password for the camera.
Date/Time
Settings:
Enter the Date and Time for each
camera. These settings can also
be configured on the Tools > System
screen (page 57) when configuring
the camera via a Web browser.