Filter
Top Products
40
DCS-6620 User’s Manual
D-Link Systems, Inc.
Using the DCS-6620 with an Internet Browser
Configuration > Advanced > Network (continued)
The e-mail address of recipients for the secondary server.
The return e-mail address to use if the snapshot or system
log e-mail fails to send. (This address should be within the
SMTP server’s domain for authentication purposes.)
Sender e-mail address:
2nd recipient
e-mail address:
FTP Settings
Granted password on the external FTP server.
Granted user name on the external FTP server.
The domain name or IP address of the external FTP server.
The following user settings must be correctly configured for
remote access.
Can be other than default port 21. If you find that you want
to change the port to a port number other than 21, you will
need to specify the port when connecting to the FTP server.
For example FTP://68.5.1.81:60 (if you are to use port 60 for
your FTP server port)
1st FTP password:
Local FTP server port:
1st FTP server:
1st FTP user name:
1st FTP server port:
If the DCS-6620 is located inside a network that is protected by
a firewall, a data connection for FTP may be prohibited. Passive
mode FTP can bypass this rule and allow the uploading of
snapshots. If the passive mode is selected, the DCS-6620 can
automatically attempt to upload in active mode if the external
FTP server does not support passive mode.
1st FTP passive
Mode:
Granted folder on the external FTP server. The string must
conform to the external FTP server. Some FTP servers cannot
accept a preceding slash symbol before the path if there is no
virtual path mapping. Refer to the instructions of the external
FTP server for details. The folder privilege must be open for
upload.
1st FTP remote folder:
The domain name or IP address of the external FTP server.
Note that the 2nd FTP server will only be used if the 1st FTP
is unavailable. If image upload to the 1st FTP is successful,
no attempts will be made to connect to the 2nd FTP server.
2nd FTP server:
2nd FTP server port:
The port to access the external FTP server.
The port to access the backup FTP server.