Filter
Top Products
DVG-G5402SP User’s Manual ADVANCED
D-Link Systems, Inc.
36
Calling Feature Instructions:
Call Hold: The call will be held after the FLASH button is pressed on the phone set. The VoIP Router
will play a hold music (provided by your ITSP or VSP) to the remote end.
Call Transfer: The call will be held after FLASH button is pressed on local phone set (the VoIP Router
plays on-hold music to the remote end). Meanwhile, the local user can dial out another number after the
dial tone is heard. After the handset is on-hooked, the call originally on hold will then be transferred to
the new number regardless the status of the new call. If wrong number is dialed for the new call, press
the FLASH button will switch back to the call on hold. Also, if the local user doesn’t hang up the phone
after the new call is set up, press the FLASH button will switch between the original call and the new call.
Please note that the PBX between phone sets and the VoIP Router must support FLASH features in
order to use this function. If a phone set is connecting directly to the FXS port of the VoIP Router and
the FLASH button does not function, please adjust the settings in “Flash Detect Time” from “Advanced
Options” section.
Note: The availability of the above features also depends on your VoIP network. Please also check with
your service provider for these services.
Examples of establishing a Three-Way call:
1. Phone1 dials to Phone2, Phone2 answers the call.
2. Phone1 presses Flash then calls Phone3 (Phone2 is on hold) and Phone3 answers the call.
3. Phone1 dials *61 and then presses Flash to start the conference call.
Or
4. Phone1 dials to Phone2, Phone2 answers the call.
5. Phone3 dials to Phone1 (Call Waiting), Phone1 presses Flash to pick up the second call and talk
to Phone3.
6. Phone1 dials *61 and then presses Flash to start the conference call.
Note: The availability of a Three-Way call also depends on your VoIP network. Please also check with
your service provider for these services.