Filter
Top Products
DVG-G5402SP User’s Manual Dialing Principles
D-Link Systems, Inc.
91
5. Dialing Principles
5-1 Dialing Options
Dial the phone number which you want to call and press # to call out immediately. Note that if the “#
(pound)” not dialed, the number will be called out after 4 seconds by default. The period between
number dialed and call out is named “Inter Digits Timeout”. (Configurable from “DTMF and PULSE”,
default=4 seconds, see page 43).
If the phone number matches the setting of the Digit Map, the phone number will be dialed out through
the assigned interface automatically.
The phone number should contain at least 2 digits (not including * and #).
5-2 Dialed Number Processing Flow
To achieve maximum flexibility, the number dialed will be looked up in several tables defined by the
VoIP Router. If no match is found from Digit Map Table, it will then look up the number from another
table and to the registered SIP Proxy Server. The number look up flow is shown below:
A complete flow chart is shown on the next page.
Digit Map
Table
Extension
Numbe
r
Local Phone
Book
Phone Book
Manage
r
SIP
Proxy