Filter
Top Products
DVG-G5402SP User’s Manual VoIP Router Configuration-IVR
D-Link Systems, Inc.
86
a new IP address) Æenter 192*168*1*2
(new IP address).
Save Settings
When all setting procedures are completed, dial 509
(Save Settings) from phone keypad. Wait for about
three seconds, you should hear a voice prompt “1 (one).” You can now hang up the phone and please
reboot the VoIP Router to enable the new settings.
To inquire about the current VoIP Router WAN Port IP address setting
After completing all your settings, dial 101
from the keypad, then you can hear the system play back the
current WAN Port IP address. If the system does not play back the IP address after dialing 101, this
indicates that the VoIP Router currently is not connected to the Internet. Please check and make sure
the cable connections, account numbers, and passwords are correct.