Filter
Top Products
DVG-G5402SP User’s Manual ADVANCED
D-Link Systems, Inc.
39
3-2-1-6 Digit Map
Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server
has individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use
“?” or “%” in the column of Scan Code and VoIP Dial-out. “?” represents a single digit, and “%”
represents a wildcard. The function of the signs is to mapping the numbers between the number
received from user and the replaced or modified number for actual dial out. With this function, users can
easily add certain leading digits to replace a full set of numbers. There are 50 sets of leading digit
entries to choose voice routing interface.
ADVANCED → VoIP → Digit Map
Enable Pound Key ' # ' Function: Check the box to treat ‘ # ‘ as a digit and send out with other
numbers when dialing. If you un-check the box and ‘ # ‘ is pressed after dialing, it will speed up the
phone number detection of the VoIP Router.
Default Call Route: Select VoIP or Deny as the default call route for the calls.
Default VoIP Route Profile: Enter the Profile ID (ranging from 1-10) for the Default VoIP routing.
ADVANCED → VoIP → Digit Map
Scan Code: Enter the digits for the VoIP Router to scan while user is dialing.
VoIP Dial-out: Enter the actual dialing number rule for the VoIP Router to call through the Internet.
User Dial Length: Enter the total number of digits that user dialed.
Route: Select VoIP or Deny for this entry.
VoIP Route Profile: Choose the proper Profile ID and click the Config button to set the priority of VoIP
Route Profile.