Filter
Top Products
Firmware and Configuration File Management
D-Link Unified Wired and Wireless Access System
November 7, 2011 Page 29
D-Link UAP CLI Command Reference
Firmware and Configuration File Management
Table 11 shows the commands you use to manage the configuration file and firmware on the AP.
Radio and VAP Scheduler
The Radio and VAP Scheduler feature allows the user to automate the enabling or disabling of radios and VAPs
based on configured time intervals. One of the use cases of this feature is that radios can be scheduled to
operate only during the office working hours to achieve security and reduce power consumption. Another use
case is to allow access to VAPs for wireless clients only during specific times of a day.
Table 12 shows the commands you use to create and enable schedule profiles.
Table 11: System Management
Action Command
Restore the factory default settings.
factory-reset
Save the configuration to a backup file.
config download url
Example:
config download tftp://1.2.3.4/defaultcfg.xml
Restore the configuration from a previously saved
file.
config upload url
Example:
config upload tftp://1.2.3.4/defaultcfg.xml
Reboot the system.
reboot
Upgrade the firmware (requires a reboot).
firmware-upgrade url
Example:
firmware-upgrade tftp://1.2.3.4/upgrade.tar
firmware-upgrade file://1.2.3.4/tmp/upgrade.tar
Table 12: Radio and VAP Scheduler
Action Command
Create a profile to the list of available scheduler
profiles by assigning a name and an index.
add scheduler-profile-list profile-name index 1-16
Add a rule to a scheduler profile that specifies the
day of the week (or every weekday) and the time
when the rule will be in effect.
add scheduler-profile scheduleprofile-name day
{weekday | day of the week} Start 00:00-24:00 End
00:00-24:00
Examples:
add scheduler-profile profile1 day weekday start
09:00 end 13:00
add scheduler-profile profile1 day monday start 14:00
end 22:00