Filter
Top Products
VigorFly 200 Series User’s Guide
106
If you want to use PIN code, you have to know the PIN code specified in wireless client. Then
provide the PIN code of the wireless client you wish to connect to the vigor router.
Enable WPS
Check this box to enable WPS setting.
WPS Current Status
Display related system information for WPS. If the wireless
security (encryption) function of the router is properly
configured, you can see ‘Configured’ message here.
WPS SSID
Display current selected SSID.
WPS Auth Mode
Display current authentication mode of the router. Only
WPA2/PSK and WPA/PSK support WPS.
WPS Encryp Type
Display encryption mode (None, WEP, TKIP, AES, etc.) of
the router.
AP PIN
The number displayed here is used for remote client
entering the registrar’s PIN code in remote station to make
a network connection.
Configure via Push
Button
Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
router will blink fast when WPS is in progress. It will return