Filter
Top Products
VigorFly 200 Series User’s Guide
17
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
If you click PPTP/L2TP as the connection type, please manually enter the Username/Password
provided by your ISP and all the required information.
L2TP/PPTP Server IP
Address
Specify the IP address of the PPTP/L2TP server.
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
WAN IP Network Settings
You can choose Static IP or DHCP as address mode setting.
IP Address
Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask
Type the subnet mask if you chose Static IP as the WAN IP.
Redial Policy
If you want to connect to Internet all the time, you can choose
Always On.
Always On – Choose it to enable router always keep
connection.
Connect On Demand - If the connection has been idled over
the value, the router will drop the connection.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. The unit is
seconds. The range is XX ~ XX.
MAC Address Clone
It is available when the box of Enabled is checked. Click
Clone MAC Address. The router will detect the MAC