Filter
Top Products
25
Brightness + or -
(remote only)
Adjusting the brightness lightens or darkens the image.
•
To darken the image, press
-
.
•
To lighten the image, press
+.
Freeze (remote only)
The
freeze
button halts, or “freezes” the projected image. Use this
button to freeze a frame of video (the video continues to run but
the projected image is frozen). You can also freeze an image from
a computer source on the screen, allowing you to perform other
operations on the computer without the audience seeing them.
Press
freeze
again when you want the image to return to normal.
Laser (remote only)
The laser button activates a laser beam that can be used as a
pointing device. To use the laser, press and hold the laser button.
The laser goes off when the button is released.
Menu
Press
menu
to open the on-screen menus. Press
menu
again to
close the menus. When you close the menus, the projector saves
any changes you made. For more information about the on-
screen menus, see page 27.
Power
The
power
button turns the projector on and off. When you plug
the projector in, the Power LED lights. When you press the
power
button, the LED blinks green, then turns solid green and the lamp
turns on.
When you press the
power
button while the projector is on, the
lamp turns off and the LED blinks orange while the fans continue
to run to cool the projector. After the projector is cooled, the pro-
jector turns off and the LED lights solid green.