Filter
Top Products
39
Lamp hours used
Indicates how many hours the current lamp has been in use. The
counter starts at zero hours and counts each hour the lamp is in
use. After 1,900 hours, the message “Change Lamp” temporarily
appears on the screen when the projector is turned on. Change
the bulb when the brightness is no longer acceptable. See
“Replacing the Projection Lamp” on page 41 for details.
Computer resolution
Shows your computer’s resolution setting. To change this, go to
your computer’s Control Panel and adjust the resolution in the
Display tab. See your computer’s user’s guide for details.
Horizontal refresh rate
The time period that one horizontal line is displayed.
Vertical refresh rate
The time period that one video frame is displayed.
Mute status
Indicates if the audio is muted. Mute is only available on the
optional remote.
Source
Indicates the active source: Computer RGBHV, Computer VESA,
Computer M1 Analog or Computer M1 Digital, Computer
Cable , Component Video, Composite Video, or S-Video.
Speakers
Indicates if external speakers are connected.
Software version
Indicates the projector’s software version. This information is
useful when contacting Technical Support.
Startup screen version
Indicates the projector’s startup screen version. This information
is useful when contacting Technical Support.
Boot version
Indicates the projector’s boot software version. This information
is useful when contacting Technical Support.
Indicates the Cable software version. This information is
useful when contacting Technical Support.
Hub
Hub's
Cable Hub Version