Filter
Top Products
26
Using the Projector
Standby
When you press
standby
, the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 35 for details. While the projector is in
standby, the keypad and remote buttons do not affect the projec-
tor and the LED lights orange.
•
If you press
standby
again within the standby time, the projec-
tor returns to normal operations immediately.
•
If you don’t press
standby
again, the projector turns off after the
standby time.
Source (keypad only) or
Comp and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
source
button on the keypad or the
comp
or
video
button on the
remote. Press
comp
to display your computer image. Press
comp
again to toggle among the computer sources. The sources switch
in this order:
•
Computer RGBHV
•
Computer VESA
•
Computer M1 Analog/Digital
•
Computer CableWizard
Press
video
again to toggle among the video sources. The video
sources switch in this order:
•
Component Video
•
Composite Video
•
S-Video
Volume + or -
•
To increase the volume, press
+
.
•
To decrease the volume, press
-
.
Volume adjustments are saved for each source you have con-
nected.