Filter
Top Products
2.1 System
The system screen allows you to specify a time zone, to change the system password and to specify a remote management
user for the broadband router.
Parameter Description
System Settings
Time Zone
Select the time zone of the country you are currently in. The router will set its time based
on your selection.
Password Settings Allows you to select a password in order to access the web-based management website.
Remote Management You can specify a Host IP address that can perform remote management functions.
Select one of the above three system settings selections and proceed to the manual’s relevant sub-section
2.1.1 Time Zone
The Time Zone allows your router to reference or base its time on the settings configured here, which will affect functions
such as Log entries and Firewall settings.
Parameter Description
Set Time Zone
Select the time zone of the country you are currently in. The router will set its time based
on your selection.
Time Server Address
You can manually assign time server address if the default time server dose not work.
Enable Daylight Savings
The router can also take Daylight savings into account. If you wish to use this function,
you must check/tick the enable box to enable your daylight saving configuration (below).
Start Daylight Savings
Time
Select the period in which you wish to start daylight Savings Time
End Daylight Savings Time
Select the period in which you wish to end daylight Savings Time
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections
or start using the router (with the advance settings in place)
19