Filter
Top Products
Parameter Description
Dynamic IP
Your ISP will automatically give you an IP address
Static IP address
Your ISP has given you an IP address already
PPPoE
Your ISP requires PPPoE connection.
PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
L2TP
Your ISP requires L2TP connection.
Telstra Big Pond
Your ISP requires Telstra Big Pond connection.
DNS
You can specify a DNS server that you wish to use
DDNS
You can specify a DDNS server that you wish to use and configure the user name and
password provided by you DDNS service provider.
Once you have made a selection, click <More Configuration> at the bottom of the screen and proceed to the manual’s
relevant sub-section
2.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some ISP’s may also require that
you fill in additional information such as Host Name, Domain Name and MAC address (see chapter 1 “Cable Modem” for
more detail)
2.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP should provide all the
information required in this section. (See chapter 1 “Fixed IP” for more detail)
2.2.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the
information required in this section. (See chapter 1 “PPPoE” for more detail)
2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the
information required in this section. (See chapter 1 “PPTP” for more detail)
2.2.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP should provide all the
information required in this section.
22