Filter
Top Products
Example: Special Applications
If you need to run applications that require multiple connections, then specify the port (outbound) normally associated with
that application in the "Trigger Port" field. Then select the protocol type (TCP or UDP) and enter the public ports associated
with the trigger port to open them up for inbound traffic.
Example:
ID Trigger Port Trigger Type Public Port Public Type Comment
1 28800 UDP 2300-2400, 47624 TCP MSN Game Zone
2 6112 UDP 6112 UDP Battle.net
In the example above, when a user trigger’s port 28800 (outbound) for MSN Game Zone then the router will allow incoming
packets for ports 2300-2400 and 47624 to be directed to that user. Note: Only one LAN client can use a particular special
application at a time.
2.4.4 ALG Settings
You can select applications that need “Application Layer Gateway” to support.
Parameter Default Description
Enable
You can select to enable “Application Layer
Gateway” of an application and then the router will
let that application correctly pass though the NAT
gateway.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections
or start using the router (with the advance settings in place)
31