Filter
Top Products
51
Appendix
This symbol on the nameplate means the product is
Listed by Underwriters Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
Appendix
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist
after following all operating instructions,
contact the dealer where you purchased the projector or the
service center.
Give the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity
mark of the European Community (EC).
Some displays are not seen –Check the Display item. (See “Setting” on page 39.)
during the Operation.
PIN code dialog box appears at start-up. – PIN code lock is being set. Input a PIN code (1234 or
numbers you have set). (See pages 18 and 43.)
Computer 2 cannot be selected. – Select Computer 2 at the Terminal item in the Setting Menu.
(See page 41.)
The Terminal item cannot be selected. – The Terminal item in the Setting Menu cannot be selected
after Computer 2 is selected. Select other input source such
as Computer 1 or Video with the INPUT button on the top
control, the COMPUTER button or the VIDEO button on the
remote control so that the Terminal item can be selected.
The Remote Control does not work. – Check the batteries.
– Make sure no obstruction is between the projector and
remote control.
– Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4’ (5m).
– Make sure the code of the remote control is conformed to
the projector. (See page 42.)
–Unlock Key lock for the remote control in the Setting Menu.
(See page 42.)
Page Up/Down function does not work. – Make sure your computer is connected to the projector with
a USB cable. (See page 15.)
– Check cable connection between the projector and your
computer. (See page 15.)