Filter
Top Products
9
Part Names and Functions
RESET button
A built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the RESET
function excessively.
q COMPUTER IN 1/ COMPONENT IN
Connect output signal from a computer (Analog
RGB) or video equipment (Component or RGB
Scart) to this terminal. Optional cables are
required when using this terminal as component
input or RGB Scart 21-Pin Video input. (p15, 17)
When the cable is of the longer variety, it is
advisable to use this terminal and not COMPUTER
IN 2 / MONITOR OUT.
Rear Terminal
MONITOR OUT
S-VIDEO
COMPUTER IN 2 /
COMPUTER /
COMPONENT
AUDIO IN
AUDIO IN
R VIDEOL
USB
SERVICE PORT
RESET
(MONO)
AUDIO OUT
(VARIABLE)
COMPUTER IN 1
/ COMPONENT IN
q
w e
r
t y
o i u
i S-VIDEO
Connect the S-VIDEO output from video
equipment to this jack. (p16)
e AUDIO IN
Connect the audio output from video equipment
connected to r or i to this jack. (When the audio
output is monaural, connect it to L (MONO) jack.)
(p16)
y AUDIO IN COMPUTER/ COMPONENT
Connect the audio output (stereo) from a computer
or video equipment connected to q or o to this
jack. (p15, 17)
r
VIDEO
Connect the composite video output from video
equipment to VIDEO jack. (p16)
o COMPUTER IN 2/ MONITOR OUT
This terminal is switchable and can be used for
input from a computer or output to the other
monitor. Set the terminal up as either Computer
input or Monitor output properly. (Used for
Monitor out, this terminal outputs only incoming
signal from COMPUTER IN 1/ COMPONENT IN
terminal.) (p15, 41)
u AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack.
(p15, 16, 17)
This terminal outputs sound from AUDIO IN
terminal (e or y).
t USB (Series B)
Connect the USB port of your computer to this
port when you wish to use the PAGE ed buttons
on the remote control to scroll back and forth
pages on the screen of the connected computer.
(p11, 15)
w SERVICE PORT
This jack is used to service this projector.
✽
Part Names and Functions
✽