Filter
Top Products
FEEDBACK B on the “top” of the Drum has a 26-pin high density D-sub socket. Connect the
Auxiliary Feedback cable, from the controller or other device, to FEEDBACK B using a 26-pin,
high density D-Sub plug with a metal housing. When assembling the Auxiliary Feedback
cable, follow the instructions in Section 3.4.3 (Feedback Control and Communication Cable
Assemblies).
Figure 3-21: Main Encoder Buffered Output or Emulated Encoder Output on FEEDBACK B -
Connection Diagram
Drum Installation Guide Installation
MAN-DRUIG (Ver. 1.0)
3-31