eMachines ET1160 Series Personal Computer User Manual


 
Chapter 2: Checking Out Your Computer
8
Back
Important
Your computer’s hardware options and port locations may vary from this
illustration.
Component Icon Description
Power connector Plug the power cord into this connector.
Voltage switch The switch is preset at the factory. Make
sure that this is set to the correct voltage for
your area. For more information, see
“Checking the voltage selection” on page 15
PS/2 keyboard port Plug a PS/2 keyboard into this port.
Serial port Plug a serial device (such as a digital
camera) into this port.
Monitor (VGA) port Plug a VGA (blue connector) monitor cable
into this port.
USB ports Plug USB (Universal Serial Bus) devices
(such as a USB printer, scanner, camera,
keyboard, or mouse) into these ports.
Telephone jack (optional)
PS/2 mouse port
PS/2 keyboard port
Voltage switch
Power connector
Ethernet (network) jack
Case thumbscrew
Headphone/speaker jack
Microphone jack
USB ports
Modem (line) jack
(optional)
Case cover thumbscrew
Parallel port
Monitor (VGA) port
Serial port
Audio in jack
8513152.book Page 8 Wednesday, May 14, 2008 4:57 PM