Filter
Top Products
Quick Installation Guide
00825-0100-4075, Rev BA
February 2010
Smart Wireless THUM Adapter
16
Device Network Configuration
In order to communicate with the Smart Wireless Gateway, and ultimately the Information
System, the transmitter must be configured to communicate with the wireless network. This
step is the wireless equivalent of connecting wires from a transmitter to the information
system. Using a Field Communicator or AMS, enter the Network ID and Join Key so that
they match the Network ID and Join Key of the gateway and other devices in the network. If
the Network ID and Join Key are not identical, the THUM Adapter will not communicate with
the network. The Network ID and Join Key may be obtained from the Smart Wireless
Gateway on the Setup>Network>Settings page on the web server, shown in Figure 22.
Figure 22. Gateway Network Settings
AMS
Right click on the THUM Adapter and select Configure. When the menu opens, select Join
Device to Network and follow the method to enter the Network ID and Join Key.
Field Communicator
The Network ID and Join Key may be changed in the wireless device by using the following
Fast Key sequence. Set both Network ID and Join Key.
Function Key Sequence Menu Items
Wireless Setup
1,4
Smart Power, Network ID, Set Join
Key, Radio State
4075_QIG_Rev_BA.fm Page 16 Friday, February 19, 2010 11:08 AM