Filter
Top Products
Quick Installation Guide
00825-0100-4075, Rev BA
February 2010
Smart Wireless THUM Adapter
2
© 2010 Rosemount Inc. All rights reserved. All marks property of owner.
IMPORTANT NOTICE
This installation guide provides basic guidelines for the Smart Wireless THUM Adapter. It
does not provide instructions for detailed configuration, diagnostics, maintenance,
service, troubleshooting, or installations. Refer to the THUM Adapter Reference Manual
(document number 00809-0100-4075) for more instruction. The manual and this QIG are
also available electronically on www.rosemount.com.
WARNING
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please
review the Product Certifications section for any restrictions associated with a safe
installation.
• Before connecting a Field Communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe or non-incendive field
wiring practices.
Electrical shock can result in death or serious injury:
• Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions. This device may not cause harmful interference. This device must accept any
interference received, including interference that may cause undesired operation.
This device must be installed to ensure a minimum antenna separation distance of
7.87-in. (20 cm) from all persons.
IMPORTANT NOTICE
During normal operation, or in fault condition, the THUM Adapter will cause a 2.5 V drop
in the connected loop. It is important to ensure that the power supply can provide at least
2.5 V more than the minimum operating voltage of the wired device to make sure it works
properly with the THUM Adapter installed. To determine the minimum operating voltage
for the wired device, review the wired device operation and installation manual.
Emerson Process Management
Rosemount Division
8200 Market Boulevard
Chanhassen, MN USA 55317
T (US) (800) 999-9307
T (Intnl) (952) 906-8888
F (952) 949-7001
Rosemount Temperature GmbH
Frankenstrasse 21
63791 Karlstein
Germany
T 49 (6188) 992 0
F 49 (6188) 992 112
Emerson Process Management
Asia Pacific Private Limited
1 Pandan Crescent
Singapore 128461
T (65) 6777 8211
F (65) 6777 0947 / (65) 6777 0743
Enquiries@AP.EmersonProcess.com
4075_QIG_Rev_BA.fm Page 2 Friday, February 19, 2010 11:08 AM