Filter
Top Products
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
Safety Notes
110
EMC
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules, EN55022. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, can cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the interference at his own
expense.
Use only shielded cables when connecting peripherals to assure that appropriate
radio frequency emissions compliance is maintained. Installed blades must have the
face plates installed and all vacant slots in the shelf must be covered.
For applications where this product is provided without a face plate, or where the face plate has
been removed, your system chassis/enclosure must provide the required electromagnetic
interference (EMI) shielding to maintain EMC compliance.
Board products are tested in a representative system to show compliance with the
above mentioned requirements. A proper installation in a compliant system
maintains the required performance.