Filter
Top Products
Operation
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
80
LCD Mode Set LCD Mode as PWM Mode or DC Mode.
Default value is PWM Mode.
Table 5-11 USB Configuration
Field Description
USB Devices List of the USB devices attached.
Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if no
USB devices are connected. DISABLE option keeps USB devices available
only for EFI applications. Default value is Enabled.
EHCI Hand-off This is a workaround for OSs without EHCI hand-off support. The EHCI
ownership change should be claimed by EHCI driver. Default value is
Enabled.
Device Reset Timeout USB mass storage device Start Unit command timeout. The options are:
z 10 sec
z 20 sec
z 30 sec
z 40 sec
Default value is 20 sec.
Controller Timeout The time out value for control, bulk, and interrupt transfer. The options
are:
z 1sec
z 5 sec
z 10 sec
z 20 sec
z 30 sec
Default value is 20 sec.
Table 5-10 IGD-LCD Control (continued)
Field Description