Filter
Top Products
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
Safety Notes
114
Product Damage
Improper removal of the product from the packaging can damage the FRU ejector handles at
the bottom.
Do not tilt the system forward or backward when removing it from the packaging.
Operation
System Damage
During the course of handling, shipping, and assembly, pins, mounting screws, fans and other
items can become loose or damaged.
Do not operate a damaged shelf, this can cause damage to devices that interact with it.
System Overheating
Cooling Vents
Improper cooling can lead to blade and system damage and can void the manufacturer’s
warranty.
To ensure proper cooling and undisturbed airflow through the system always operate the
system in a horizontal position. Do not obstruct the ventilation openings at the top, sides and
back of the system. Keep the fresh air intake at the bottom-front side of the chassis completely
clear. Make sure that the fresh air supply is not mixed with hot exhaust from other devices.
Make sure that all slots are populated with either blades, filler blades, or dummy blades.
System Damage
Environmental contamination can impair system operation. Place the system in a stable area
free of movement and free of dust, smoke, and electrostatic discharge (ESD).
Make sure that the temperature does not exceed the operating temperature given in the
environmental requirements in this manual and allow room for proper air cooling.
System Overheating
If you reduce the blower/fan speed the system temperature rises.
Constantly control the system temperature once you have reduced the blower/fan speed.
While operating the system make sure the environmental and power requirements are met.