Filter
Top Products
Operation
10
Figure 12 Communication with UPS failed
If the RMP is functioning properly and the connection with UPS is correct, but the UPS does not sup-
port the communication function with RMP, then the RMP will display a the screen shown in
Figure 13 to report “Firmware is not Compatible with UPS.”
Figure 13 Firmware not compatible with UPS screen
If the RMP determines that the UPS firmware is not compatible, after loading all messages available
from the UPS, the RMP will display the screen shown in Figure 13.
Liebert NX
2006-01-22 12:30:36
30kVA-3X3
Unit #1 Normal
?
Bypass
Main
Vphase V
Iphase A
Freq. Hz
Vline V
P. F.
A(AB)
120
20.5
50.1
208
0.99
B(BC)
120
20.5
50.1
208
0.99
C(CA)
120
20.5
50.1
208
0.99
Output
Communication with UPS
Failed
CommErrID=0x01
F2 F4 HELPF1 F3
Input breaker closed 01-12 12:28:16
Manual turn on 01-12 12:30:06
UPS in normal mode 01-22 12:30:16
Liebert NX
2006-01-22 12:30:36
30kVA-3X3
Unit #1 Normal
?
Bypass
Main
Vphase V
Iphase A
Freq. Hz
Vline V
P. F.
A(AB)
120
20.5
50.1
208
0.99
B(BC)
120
20.5
50.1
208
0.99
C(CA)
120
20.5
50.1
208
0.99
Output
Firmware is not
Compatible with UPS
RMP:Vxxx UPS:Vxxx
F2 F4 HELPF1 F3
Input breaker closed 01-12 12:28:16
Manual turn on 01-12 12:30:06
UPS in normal mode 01-22 12:30:16