Filter
Top Products
RTM-ATCA-F120-OPT Installation and Use (6806800G29C)
Safety Notes
14
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.Changes or
modifications not expressly approved by Emerson could void the user's authority to operate
the equipment. Board products are tested in a representative system to show compliance with
the above mentioned requirements. A proper installation in a compliant system will maintain
the required performance.Use only shielded cables when connecting peripherals to assure
that appropriate radio frequency emissions compliance is maintained.
Operation
Damage of the RTM
High humidity and condensation on the RTM surface causes short circuits.
Do not operate the RTM outside the specified environmental limits. Make sure the RTM is
completely dry and there is no moisture on any surface before applying power.
Do not operate the RTM below -5°C.
Installation
Damage of the RTM and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules may damage the RTM or the
additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation.
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the RTM can damage circuits
or shorten their life.
Before touching the RTM or electronic components, make sure that your are working in an
ESD-safe environment.
Damage of the RTM
Incorrect installation of the RTM can cause damage of the RTM.
Only use handles when installing/removing the RTM to avoid damage/deformation to the face
plate and/or PCB.