Filter
Top Products
Hardware Preparation and Installation
RTM-ATCA-F120-OPT Installation and Use (6806800G29C)
26
Any optional items ordered
2. Check for damage and report any damage or differences to the customer service.
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the board.
2.3.1 Environmental Requirements
You must make sure that the blade, when operated in your particular system configuration,
meets the environmental requirements specified below.
z The RTM is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service
immediately.
z Remove the desiccant bag shipped together with the blade and dispose of it according to
your country’s legislation.
Operating temperatures refer to the temperature of the air circulating around the RTM, and
not to component temperatures.
If you integrate the RTM in your own, non-Emerson, system, please contact your local sales
representative for further safety information.
RTM Damage
High humidity and condensation on the RTM surface causes short circuits.
Do not operate the RTM outside the specified environmental limits. Make sure the RTM is
completely dry and there is no moisture on any surface before applying power.
Do not operate the RTM below 0°C.