Filter
Top Products
4 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010
3Configuring the
SS-100
1. IMPORTANT: Download the latest version of
EZWebCon from the Lantronix Web site
www.lantronix.com
.
2. Connect the SS-100 to the LAN and power up the
unit.
3. Open EZWebCon on your computer (which must
also be connected to the LAN) and click the bin-
oculars icon (outlined in red) to find the allocated
IP address of the SS-100:
4. Choose the correct device on the Browse Net-
work screen and then click Ok:
5. Verify that the firmware version number in the
"Firmware" column is "3.6/9". If the firmware
version shows any other number than "3.6/9," the
SS-100 is the wrong version; contact Technical
Service for instructions on upgrading.
If the Firmware version is correct, proceed to
step 6.
6. Highlight the device and select Action>Manage
from the drop-down menu to open the Home
screen:
7. When any of the links along the left-hand side of
the screen are clicked the first time, you are
prompted to the Password screen: enter the pass-
Device Configurator (Search Tool Outlined)
NOTE: A search will locate all SS-100s on the
network. Use the MAC address located on the
back of the SS-100 to find the correct SS-100
in the list.
Choose and Highlight the Device
Action Menu Displayed