Filter
Top Products
2 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010
ed)
• DB-25/DB-9 female/female null modem cable (not
provided)
• Static IP Address
Requirements for Computers Connecting to SS-
100:
• IBM PC running Windows 9x/NT/XP/2000 set up
on an IP network
• EzWebCon Installed (download from www.lan-
tronix.com)
• UltraSite version 3.30 or higher (if using UltraSite)
2.1. SS-100 HALComm and UltraSite Wiring Layouts
SS-100 Direct to HALComm Steps
1. Connect 25-pin female end of DB-25 null modem
adapter to the 25-pin male port of the SS-100.
2. Connect 25-pin female end of DB-25/DB-9 STC
adapter to the 25-pin male end of the DB-25 null
modem adapter.
3. Connect female end of the 10’ serial cable to the
male end of DB-25/DB-9 STC adapter.
4. Connect DB-9 female/female STC gender
changer to the male end of the 10’ serial cable.
5. Connect the other end of the DB-9 female/female
STC gender changer to the male 9-pin Modem
port of the HALComm.
6. Use a standard ethernet cable to attach the SS-
100 to an active hub of your TCP/IP network.
Wiring Layout with HALComm
NOTE: Using a DB-25/DB-9 female/female
null modem cable (not provided) to connect
the SS-100 to the Modem port on the HAL-
Comm controller will eliminate steps 2-6.
NOTE: Screws on the DB25 null modem
adapter may need to be reversed for a correct
connection with the DB25/DB9 STC adapter.