Filter
Top Products
6 • Setting the Port Properties for UltraSite and HALComm in Lantronix 026-1607 Rev 4 07-APR-2010
2. Set the Port Inactivity Timeout to 5 minutes
under Server Settings and click the Update
Server Settings button.
3.3. Setting the Port Properties for
UltraSite and HALComm in
Lantronix
3.3.1. UltraSite
1. Click the Port Properties link (above graphic)
from the list along the left-hand side of the
screen.
If using UltraSite, set the following parameters on the
Lantronix:
• Set the Flow drop-down list to ctsrts.
• Check the Inactivity Logout and Modem
Emulation boxes.
• Click the Update Port Settings button.
• Click the Go back link to save the settings and
go back to the Serial Port Settings screen.
• Uncheck the DSR Logout and DTR Wait
boxes.
• Click the Update Port Settings button.
Server Settings Outlined in Red
Serial Port Settings Screen for UltraSite
Go Back Screen