Filter
Top Products
SS-100 Serial Server SS-100 Wiring Requirements • 3
7. Plug 110VAC/5VDC power transformer into the
SS-100.
SS-100 to Reflecs Steps
1. Connect the 25-pin end of the D25/DB9 straight-
through connector to the SS-100.
2. Connect the 9-pin female end of the laptop cable
to the straight-through serial connector.
3. Connect the SS-100 to the hub using the RJ-45
able.
4. Plug the 4-position plugable connector into the
Reflecs controller.
5. Plug 110VAC/5VDC power transformer into the
SS-100.
Wiring Layout with UltraSite