Emprex ME3 Network Card User Manual


 
26
III. HD video output
ME3 supports HD video output, 720p or
1080i, when playing Photo, and Video.
From Setup/Video menu, you can change
the HD output. If you select 720p or
1080I, ME3 will play Photo and Video file
with the selected video resolution.
Note:
Only component (YPbPr)
video output can support 720p,
and 1080i resolutions.
Composite (AV OUT) video
output can only support NTSC,
and PAL resolution. If you
select HD output, using
Composite (AV OUT) video
connection, there will be no
display on TV or monitor when
playing photo and video files.
You can press SETUP key to
turn off HD Output from
Video setup menu.
The selected resolution needs
to be supported by your TV or
Monitor, otherwise there will
be no display.
IV. Zoom in
You can ZOOM in the display when ME3 is
playing photo, video, or recorded video.
Press ZOOM key to zoom in the display,
and zoom factor will be changed from 2x,
3x, 4x, 8x, and 1x sequentially.
V. Exchange files with PC
ME3 can serve as an external HDD of PC.
When ME3 is powered on, use supplied
USB cable to connect USB Host port of PC
and USB Device port of ME3. Windows
of PC will detect HDD of ME3 automatically.
You can use file explorer to manipulate the
files in HDD of ME3.
Note:
The OS of PC needs to be
compatible with Windows XP
and above.
Use safely removal function in
Windows to stop the HDD
before removing the USB
connection.
DO NOT break the USB
connection when HDD is
writing or reading.
VI. Playing DVD files
Back up a DVD video Disc into a folder in
HDD, USB or NET storage device.
Note:
Some DVD Discs can not be
copied because of copy
protection. The backup
operation must obey your
local raw of copyright.
Please do not copy or
distribute media with
copyright.
Browse the folder and Open the video_ts
subfolder.Play the video_ts.ifo file. Usually,
the video_ts.ifo is the first file in the
subfolder. The menu of the DVD video
will be shown, you can use the remote
control to navigate the DVD video.