Emprex ME3 Network Card User Manual


 
2
C. Preparing the remote control
1. Pull out the isolator
2. Ready to use
Pull out a piece of isolator, then
remote control can be used.
D. How to replace battery of
remote control
When the remote control runs out
of battery, you may follow the
instructions to replace the battery.
1. Open the battery cover
2. Put in CR2025 battery
( Positive pole "+" face up)
3. Put on the battery cover
Note:
The model of the battery is
CR2025.
Please confirm the polarity
before you insert the battery.