Filter
Top Products
Enterasys NAC Controller Hardware Installation Guide 4-1
4
NAC Controller PEP Installation
ThischapterprovidestheinstructionstoinstalltheNACControllerPEPs2S4082‐25and7S4280‐19
andtheMini‐GBICsinterfacemodules.
FollowtheorderofthesectionslistedbelowtocorrectlyinstalltheNACControllerPEPintothe
chassis.
Required Tools
ToolsneededtoinstalltheNACControllerPEPandoptionsinclude:
• Phillipsscrewdri ver
•Flatbladescrewdriver
Unpacking the NAC Controller PEP
UnpacktheNACControllerPEPasfollows:
1. Opentheboxandremovethepackingmaterialprotectingthemodule.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Important Notice
Read the Release Notes shipped with the NAC Controller PEP to check for any exceptions to the supported
features and operation documented in this guide.
For information about... Refer to page...
Required Tools 4-1
Unpacking the NAC Controller PEP 4-1
Installing Optional Mini-GBICs 4-2
Installing NAC Controller PEP into the Matrix N1 Chassis 4-5
Connecting to the Network 4-7
Connecting to COM Port for Local Management 4-14
Completing the Installation 4-18