Filter
Top Products
SNMP Traps Configuration Screen
Module Configuration Menu Screens 5-23
5.5 SNMP TRAPS CONFIGURATION SCREEN
When to Use
To assign SNMP traps to eight different IP addresses. Since the switch module is an SNMP
compliant module, it can send messages to multiple Network Management Stations to alert users
of status changes.
How to Access
Use the arrow keys to highlight the SNMP TRAPS CONFIGURATION menu item on the
SNMP Configuration Menu screen, and press ENTER. The SNMP Traps Configuration screen,
Figure 5-9, displays.
Screen Example
Figure 5-9 SNMP Traps Configuration Screen
NOTE: It is only necessary to assign SNMP traps when the user needs the traps sent
to different addresses than those assigned for the chassis. Refer to Section 4.4, which
details how to set SNMP Traps for the 6C105 chassis.
4046_17
Trap Community Name
public
public
public
public
public
public
public
public
RETURNSAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT