Filter
Top Products
Module Menu Screen
Accessing Local Management 3-13
Menu Descriptions
Refer to Table 3-3 for a functional description of each menu item.
NOTE: If the terminal is idle for several minutes, the Local Management Password
screen redisplays and the session ends. This idle time can be changed in the Chassis
Configuration screen described in Section 4.2.
Table 3-3 Module Menu Screen Menu Item Descriptions
Menu Item Screen Function
MODULE
CONFIGURATION
Provides access to the Local Management screens that are used to
configure the switch module and also provides access to the Port
Configuration Menu screen, 802.1 Configuration Menu screens, and
the Layer 3 Extensions Menu screens.
The Port Configuration Menu screen provides access to the screens that
are used to set operating parameters specific to each port.
The 802.1 Configuration Menu screen provides access to the Spanning
Tree Configuration Menu screen, 802.1Q VLAN Configuration Menu
screen, and the 802.1p Configuration Menu screen. These screens are
used to set the basic switch operations, and provide access to screens to
configure VLANs, and assign port priorities.
For details about the screens, refer to:
• Chapter 5 for the Module Configuration Menu screen,
• Chapter 6 for the Port Configuration Menu screen,
• Chapter 7 for the 802.1 Configuration Menu screen, and
• Chapter 10 for the Layer 3 Extensions Menu screen.
MODULE
STATISTICS
Provides access to screens used to obtain statistics and performance
information for the switch module. For details, refer to Chapter 11.
NETWORK
TOOLS
The Network Tools function resides on the switch module and consists
of commands that allow the user to access and manage network
devices, including the ability to Telnet to other devices. Chapter 12
explains how to use the Network Tools utility.