Filter
Top Products
IGMP/VLAN Configuration Screen
10-4 Layer 3 Extensions Menu Screens
The following multicast routing protocols are transparently supported and are used only to detect
the location of routers (See the Release Notes for any changes or additions to this list):
• DVMRP (Distance Vector Multicast Routing Protocol, RFC 1075)
• PIM (Protocol Independent Multicast) version 1 and 2
• CBT (Core Based Trees)
• MOSPF (Multicast OSPF, RFC 1583)
For additional information about IGMP, refer to Appendix B.
How to Access
Use the arrow keys to highlight the IGMP/VLAN CONFIGURATION menu item on the Layer 3
Extensions Menu screen and press ENTER. The IGMP/VLAN Configuration screen (Figure 10-2)
displays.
Screen Example
Figure 10-2 IGMP/VLAN Configuration Screen
25042-104w
Configuration
------------------
IGMP Version: [ 2 ]
Query Interval: 120
Query Response Time: 10
Interface Robustness: 2
Last Member Query Interval: 1
Switch Query IP: 123.123.123.123
Statistics
-------
Querier Address: xxx.xxx.xxx.xxx
Querier Uptime: 0 D 10 H 16 M
Querier Expire Time: 219 S
VLAN ID: [ 003 ]
IGMP State: [ ENABLED ]
RETURNSAVE
EXIT