Filter
Top Products
The MultiSwitch 700 Device View
2-44 Managing the Module
Accessing the UPS Window
At the UPS window, you can configure the UPS ID model type for the
uninterruptable power supply you have attached to the COM port on your
device.
You can also view information concerning the UPS connected to your
MultiSwitch 700 including:
• The amount of time that your UPS has been running since the last start-up
• The line voltage and battery output
• The actual battery capacity of the UPS (dynamic bar graph)
You can also use a button at the bottom of the window to disconnect your UPS, or
you can use the Test option to initiate a self test of the unit.
To access the UPS window:
1. Click on D
evice in the menu bar to access the Device menu.
2. Select U
PS. The UPS window, Figure 2-19, opens.
Figure 2-19. The UPS Window