Filter
Top Products
The MultiSwitch 700 Device View
2-72 Managing the Module
Under the list box there are two groups of check boxes that display the ports on
the switch. A checkmark in the port’s check box indicates that the VLAN selected
in the list box is in the port’s egress list. The two groups are:
Egress Ports
Use these check boxes to add or remove the selected VLAN from the egress list of
one or more ports.
Egress Untagged List
Use these check boxes to allow the ports to transmit untagged frames from the
selected VLAN.
Building an Egress List
To build egress lists for your 802.1Q switch:
1. In the list box at the top of the window, click to select a configured VLAN. The
ports that contain the selected VLAN in their egress lists will be displayed in
the lower portions of this window with checkmarks in their check boxes.
2. To add or remove the selected VLAN from the egress list of one or more ports,
click on the appropriate check box in the Egress Ports group. A checkmark in
a port’s check box indicates that the selected VLAN is in the port’s egress list.
3. To add or remove the ability for a port to transmit both tagged and untagged
frames from the selected VLAN, click to put a checkmark in the appropriate
check box in the Egress Untagged List group. Note that a port check box in
this group will be grayed out until it has been selected in the Egress Ports
group.
4. To apply any changes, click on the Apply button at the bottom of the window.
Setting the Device Date and Time
The Device menu provides the options that allow you to change the date and
time stored in the device’s internal clock: Edit Device Time and Edit Device
Date.
To edit the device time:
1. Click on D
evice on the Device View menu bar to access the Device menu.
2. Select Edit Device T
ime. The Device Time change window, Figure 2-29,
opens.