Filter
Top Products
Aurorean Network Gateway-1000 User’s Guide
9
Chapter 2 Checking ANG-1000 Connections
Installation
Checking ANG-1000 Connections
The ANG-1000 is now connected and ready for configuration. Check rear and
front LEDS in the manner described below to confirm that the connections are
working properly.
Rear Panel Link LEDs
The two top link LEDs on the rear panel light the moment a connection is
made to the respective network. The two bottom link LEDs light when data is
received and transmitted to the respective network by the ANG-1000. Trusted
and external connections are operational and traffic is being passed as shown
in Figure 10.
Figure 10 Network Connection Indicators
Front Panel LEDs
The two front LEDs behave as follows at when powered up at startup:
H Power LED lights
H Active LED blinks indicating the CPU is active
All front panel LEDs are displayed in Figure 11.
EXTERNAL
TRUSTED